RTV TIN SILICONE RUBBER MOLD MAKING - 128 Ounces, ONE Gallons / High Strength

Description

High Quality, High Strength
TIN CURE
RTV Silicone
POLYSOL's
RTV silicone mold making rubber is a two-component material.
There is a Part A and a Part B that is mixed together at a 10/1 ratio
APPLICATIONS:
-
Soft baits / Lures {Plastisol}
Wax
Soap
UltraCal 30
EpoxyLow melt metals (
up to 400 degrees Max
)
Polyester
Fiberglass Resign
Plaster
Urethane Rubber & Plastic
HydroCal White
MIXING:
Mix Part A and Part B at a 10/1 ratio.  Once the two components are mixed thoroughly you will have roughly 45 minutes to pour the mixture.
CURING
:
After the mixture is poured it will fully cure in 12 Hours.
PROPERTIES
Mix Ratio: 10/1 by weight
Base
Color - Beige
Catalyst
Color - Blue
Specific Gravity - 1.07
Viscosity (cPs) - 16,000
Pot Life (pour time) - 45 min.
Tensile - 600
Elongation, % -  160
Durometer, Shore A = 45/50
Tear Strength - 25
Materials Recommended:
Digital Gram or Digital Postage Scale
Mixing Containers
Stir Sticks
Latex or Nitrile Gloves