Professional Instant glue Cosmofen CA 12 cyanoacrylate 20 g Germany

Description

COSMOFEN CA 12 / COSMO CA-500.200 / 20 grams
Multi-Purpose High Quality Professional Instant Glue
PRODUCT DESCRIPTION
Thanks to its wide adhesion spectrum, COSMO CA-500.200 is suitable for a lot of different materials and for many application fields in trade and industry, and particularly for the bonding of different plastic materials.
Made in Germany.
Basis
cyanoacrylate
Film property
hard
Viscosity
low-viscosity
Packaging
20g PE-bottle
Colour
transparent
Capillary nozzle
for exact fine dosing
SPECIAL CHARACTERISTICS
* ideally suitable for the bonding of different plastic materials
* short setting times
* very high strength
* good weather resistance outside
* high cold- and heat resistance
* very good UV-stability
* bonding of APTK / EPDM-elastomers
* solvent-free
APPLICATION EXAMPLES
* APTK / EPDM-sealing profiles in the window manufacturing (e.g. mitre cuts, butt joints with each other and PVC-hard- and aluminium profiles)
* processing of plastic materials, elastomers, rubber
* toy industry
* optical industry
* jewellery industry
* sealing technique
* wastewater technology
* metal construction
* vehicle manufacturing, aircraft construction and shipbuilding
* leather- and shoe industry, orthopaedics
* advertising technique and industry
* medical engineering / dental technology
* electrical and electronic industry
* production of household appliances
INSTRUCTIONS FOR USE
The surfaces of the workpieces to be bonded must be dry, and free from dust and grease.
Apply the adhesive from the trading unit or by means of a CA-dosing unit onto one side.
Immediately after application, the workpieces must be fit together and pressed until they reach the required functional
strength.
In principle, CA-adhesives cure by means of air and material humidity. This means that ambient conditions, material
and condensation humidity on the surfaces to be glued, thickness of applied adhesive layer and press power, as well
as surface roughness of the materials to be glued significantly influence the process.
The chemical characteristics of the surfaces to be glued, e.g. pH-value, variations of raw material characteristics,
surface coatings, as well as corrosion and contamination have a significant effect on the desired bonding strength.
Pressing times strongly depend on material and adhesive temperature.
To reduce the pressing times, or to accelerate curing of cyanoacrylate adhesives in thicker bonded joints >0.10 mm,
the accelerator COSMO SP-860.120 is to be used.
To achieve a durable resistance to penetration of rain, the ift-Rosenheim recommends additional bonding of the
section corner on the glass pane using neoprene rubber filler or sealing compound for bonding the external glass strip
seals in window construction.
If silicon, TPE sections and polyolefins are bonded, they are to be pretreated with primer COSMO SP-840.110. The
variety of materials requires to carry out some preliminary tests yourself.
Bonding of aluminium, copper, brass: only on chemically pretreated or varnished surfaces; these materials cannot be
durably bonded to be age-resistant without appropriate pre-treatment of the surfaces to be glued.
Bonding of materials with different longitudinal extension must be assessed regarding their long-term behaviour,
especially when they are exposed to fluctuating temperature ranges.
Please, consider the relevant Technical Data Sheets of the recommended products mentioned above.
Open time, as well as the necessary pressing time, can only be determined accurately by self-tests because they are
strongly influenced by material characteristics, temperature, applied quantity, air humidity, material humidity, thickness
of adhesive film, press power, and other criterions. Usually, appropriate safety factors are considered for the guiding
values.
SAFETY
It is irritating to eyes, respiratory system and skin!
Adhesive vapors do not inhale!
Avoid contact with eyes and skin!
Operating room is well ventilated!
Bonds within seconds skin and eyelids.
Keep out of the reach of children!
We ship worldwide by airmail with tracking.
Europe: 10-21 days
US: 14-21 days
Other countries: 14-30 days
Thank you for viewing and purchase!