E6000 QuickHOLD 2oz Adhesive Permanent Glue Rhinestone

Description

QuickHOLD is an all-purpose adhesive with a thin, quick dry formula that's perfect for craft projects. The quick-dry formula is ideal for items requiring immediate movement. QuickHOLD bonds easily to metal, stones, jewels and much more.
Thin viscosity – ideal for delicate applications
Quick dry – sets in 2-3 minutes
Dries clear
Water resistant
Paintable once cured
A high-performance industrial adhesive that
became a hit in the craft market with its
superior performance, flexibility and versatility.
Typical Use:
E-6000® outperforms silicones, acrylics and rubber cements because it adheres to more surfaces with greater durability. E-6000® provides a superior bond on stubborn porous and non-porous substrates like metal, plastic, glass, concrete, rubber, as well as brick, tile, marble, ceramic, vinyl, fabric, canvas, leather and wood.
Just follow these step-by-step directions when using E-6000®:
Please read all directions
before using.
E-6000
should be used in a well-ventilated area.
Surface should be clean, dry, and free from dirt.
For best results, roughen surface before use. Best when used between 70 \u00b0F (21 \u00b0C) and 85 \u00b0F (29 \u00b0C).
Always test a small area
to ensure proper application technique and dry time.
Amazing E-6000 directly to each surface to be bonded or repaired.
Allow
E-6000
to partially cure, 5-10 minutes, before bringing surfaces together.
E-6000
hardens by solvent evaporation and forms an immediate bond that is difficult to reposition after both adhesive-coated surfaces are placed in contact with each other and sufficient pressure is exerted to establish full contact.
For maximum strength, allow to dry for 48 hours.
Cure time increases with lower temperatures and decreases with higher temperatures.
Keep threads at the neck of the tube free of E-6000 residue.
To ensure easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
Clean uncured adhesive
with small amounts of acetone or naphtha; the adhesive will ball up and brush off. Cured material may be removed by cutting or scraping.
Store unused Amazing E-6000 at room temperature with cap tightened.
NOTE:
E-6000 may damage finished surfaces. Avoid such contact until E-6000 is completely dry.
Information:
Industrial-strength single component adhesive.
Bonds to glass, wood, plastics, tin, metal, ceramic, cement, rubber, vinyl, leather, fabric and many more.
Dries clear.
Photograph safe.
Safe for repeated washing and drying.
Paintable
Withstands heat up to 150 F / 66 C.
Uses:
Decorate glass bottles with plastic, metal and wood.
Affix beads to vases.
Assemble silk or plastic floral arrangements.
Decorate wood frames with fabric.
Create unique jewelry with metal findings.
Assemble wooden birdhouses.
Repair wooden or ceramic planters.
And much more!