BEACON "Glass Metal and More" GLUE - 2oz tube, weatherproof, clear & flexible

Description

Beacon's Premium permanent glue
for "Glass, Metal and More"
2 fluid ounce tube
Terrific glue for bonding plexiglass!
NOTE: this product was formerly called "PLEXIBOND".
Bonds most metals, glass, mirrors, plexiglass and other hard plastics, craftwork like mosaics, mirrors, glass, jewelry, plus wire, vinyl, fiberglass, rubber, ceramics, shoes, and many more hard-to-glue materials.
Use sparingly -  a little goes a long way!
Super strong
and
flexible
.
Remains flexible when dry and won't yellow with age or turn brittle.
Grabs fast
,
dries clear & stays clear.
Waterproof and weather proof, UV resistant means its suitable for outdoor uses!
Paintable.
Bonds flexible materials as well, including fabric, leather, canvas, wood trim, ribbon, suede, and more.
Suggested Retail Price is .79
HINTS
FOR USING "Glass, Metal, and More"
For best results,
s
urfaces must be cleaned
.
For Plastics it highly recommended to rub-down with alcohol (such as methanol or rubbing alcohol) in order to remove any traces of mold-release agent and trace oils. This is necessary for the product to work!
Use the product sparingly!
Solvent-based
glues can damage some kinds of items (finished surfaces & some plastics for example). Test first on scrap material- NOT for use with foams. Protect work area with newspaper.
Remove the sheen from shiny items for best results (items with a smooth finish) using steel wool or fine sandpaper.
Apply to one surface, do not apply pressure. Clamping isn't needed.
Grabs fast, but
allow to dry for 24 hours for full strength!
IMPORTANT:
Always replace the cap tightly
after each use to prevent product evaporation.
Can be thinned with Toluene only. Cleans up with Acetone.  Solvents are flammable - use with caution (use in a ventilated area, keep away from heat, flame, and keep away from children).
The product is FLAMMABLE when wet - do not use near flame and do NOT smoke while using. Vapors may be irritating or harmful, so use in a well-ventilated area.
NOT suitable for children
.
Keep out of the reach of children.
Refer to the product label for information.
Proudly
Made in the USA
by Beacon Adhesives, a family-owned company! Support US workers!
Beacon Adhesives are now being sold by:
Rabid Models
"there is a fine line between a hobby and a mental illness"
SHIPPING:
postage calculated for sending via USPS 1st Class Mail.
PAYMENT:
I prefer PAYPAL (extremely easy to use your credit card and there's no extra charge to you).  Paypal protects both of us and is the fastest method to close the deal !
NOTE:
if you purchase more than one item, please WAIT until I send you a combined invoice with the new total before sending your payment.
PLEASE
use EBAY Checkout to complete the transaction.
Or - I will send an invoice by email after the sale.  If you don't hear from me immediately please check your spam settings - spam filters will sometimes stop legitimate emails.
I
earn
your positive feedback and I'm proud of my excellent feedback rating and happy customers. Please leave me feedback after you receive your order and I'll return the favor!